Jensamp - Unterstützung beim Bauen

Das Labor ist der richtige Ort um spezielle Projekte inkl. Fehlersuche zu diskutieren.

Moderatoren: TVPstudio, kubi

[silent:arts]
Beiträge: 3520
Registriert: Sa Jun 10, 2006 5:54 pm
Wohnort: BLN
Kontaktdaten:

Re: Jensamp - Unterstützung beim Bauen

Beitrag von [silent:arts] »

Not for this problem.

They worked in low gain?
Worked even with more gain after re-soldering?
For me: a myth.

But since many people have the same problem,
it might be a strange batch.

I'm sure those Transistors will show up fine on a standard tester.
volker
olafmatt hat geschrieben:Strom kann tot machen

tzman
Beiträge: 8
Registriert: Di Apr 19, 2011 10:23 pm
Wohnort: The Netherlands

Re: Jensamp - Unterstützung beim Bauen

Beitrag von tzman »

Yeah I know...it is strange. I think it's way more likely that I damages the parts by putting on the heatsinks.

So there's no need the match them in any way, Volker?
And also, the 12 steps/11 dots on the frontpanel is correct, right?

[silent:arts]
Beiträge: 3520
Registriert: Sa Jun 10, 2006 5:54 pm
Wohnort: BLN
Kontaktdaten:

Re: Jensamp - Unterstützung beim Bauen

Beitrag von [silent:arts] »

Yes, and yes.
volker
olafmatt hat geschrieben:Strom kann tot machen

tzman
Beiträge: 8
Registriert: Di Apr 19, 2011 10:23 pm
Wohnort: The Netherlands

Re: Jensamp - Unterstützung beim Bauen

Beitrag von tzman »

Thanks!

culteousness1
Beiträge: 159
Registriert: Mi Okt 20, 2010 3:01 pm
Wohnort: Köln Ehrenfeld

Re: Jensamp - Unterstützung beim Bauen

Beitrag von culteousness1 »

[silent:arts] hat geschrieben:I will never order any part for a any Kit from Reichelt anymore.
Lesson learned.
This isn't a Reichelt problem. I ordered all semis for my
Silverline D-ASY from Farnell and got one motorboat unit too.

Carsten

tzman
Beiträge: 8
Registriert: Di Apr 19, 2011 10:23 pm
Wohnort: The Netherlands

Re: Jensamp - Unterstützung beim Bauen

Beitrag von tzman »

Yeah, the substitutes I ordered are exactly the same brand and type as the ones that came with the kit. I ordered them at Farnell too.

Upacesky
Beiträge: 8
Registriert: Fr Aug 08, 2014 12:46 am

Re: Jensamp - Unterstützung beim Bauen

Beitrag von Upacesky »

What's the difference between a bc140-16 and bc140-10? I read the HFE is higher in the 16, but I have no idea what it means.
So which one do we need?

tzman
Beiträge: 8
Registriert: Di Apr 19, 2011 10:23 pm
Wohnort: The Netherlands

Re: Jensamp - Unterstützung beim Bauen

Beitrag von tzman »

I don't think it matters in this design, but I bought these: http://de.farnell.com/multicomp/bc140-1 ... =lookahead.
BC140-16 is also what is supplied with the kits.

Antworten