Dual La2a - [silent:arts] version
-
- Beiträge: 3520
- Registriert: Sa Jun 10, 2006 5:54 pm
- Wohnort: BLN
- Kontaktdaten:
-
- Beiträge: 265
- Registriert: Sa Jun 03, 2006 6:26 pm
- Wohnort: Kölle
- Kontaktdaten:
-
- Beiträge: 462
- Registriert: Fr Okt 26, 2007 10:49 pm
- Wohnort: Irvine California US
- Kontaktdaten:
Bernd!
That looks nice! Mine is soon to come ...
I have one question concerning power supply again:
My current torriod when I put a dummy load on the 6.3VAC tap and setup a current draw of 3.5 amps the voltage dropped (IR drop) to almost 6VAC is this still ok for the tube heaters?
thoughts? I think it should be fine, what do you guys think?
-Chuck
That looks nice! Mine is soon to come ...
I have one question concerning power supply again:
My current torriod when I put a dummy load on the 6.3VAC tap and setup a current draw of 3.5 amps the voltage dropped (IR drop) to almost 6VAC is this still ok for the tube heaters?
thoughts? I think it should be fine, what do you guys think?
-Chuck
-
- Beiträge: 3520
- Registriert: Sa Jun 10, 2006 5:54 pm
- Wohnort: BLN
- Kontaktdaten:
-
- Beiträge: 462
- Registriert: Fr Okt 26, 2007 10:49 pm
- Wohnort: Irvine California US
- Kontaktdaten:
I don't understand the questionbtw, why is it 12V in series, not 12,6V ?
Here is the transformer I picked out
http://www.antekinc.com/AN-1T250.pdf
AN-1T250 $29.00 USD
250 0 250 VAC
6.3 @ 3amps (tested this coil at 3.5amp saw drop to just above 6VAC)
12.6 @ 2 amps
The price is good since I need 3 of them! (2-STLA2A and 1-Analag)
I am going to have 2 versions of the ST LA2A one with real T4bs and one with Vactrols either the VTL5c4/2 or the VTL5C3/2 depending on the testing.
-Chuck
-
- Beiträge: 3520
- Registriert: Sa Jun 10, 2006 5:54 pm
- Wohnort: BLN
- Kontaktdaten:
-
- Beiträge: 390
- Registriert: Mi Apr 05, 2006 7:02 pm
- Wohnort: Ulm, Germany
- Kontaktdaten:
-
- Beiträge: 3520
- Registriert: Sa Jun 10, 2006 5:54 pm
- Wohnort: BLN
- Kontaktdaten:
-
- Beiträge: 2908
- Registriert: Fr Mär 24, 2006 9:20 pm
- Wohnort: Karlsruhe, BRD
-
- Beiträge: 390
- Registriert: Mi Apr 05, 2006 7:02 pm
- Wohnort: Ulm, Germany
- Kontaktdaten:
Well it looks a bit decieving. Actually the 2254 is not ready yet. Both those units are the units i am working on right now.
There is still quite some work left on the 2254 (which will use the wonderland parts). Boards are 95% populated, switches and case is ready. I still need to buy all transformers besides the outputs. (now this will get expensive ) So what's then left is to stick all the boards inside the case and do all the wiring. I am already wondering how this will turn out
Flo
There is still quite some work left on the 2254 (which will use the wonderland parts). Boards are 95% populated, switches and case is ready. I still need to buy all transformers besides the outputs. (now this will get expensive ) So what's then left is to stick all the boards inside the case and do all the wiring. I am already wondering how this will turn out
Flo
-
- Beiträge: 265
- Registriert: Sa Jun 03, 2006 6:26 pm
- Wohnort: Kölle
- Kontaktdaten: